• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle from key cloning and prevents thieves from driving it using the original keys. Our most recent immobiliser is connected to the CAN data network of your vehicle and a unique PIN must be entered to start the engine.

Unlike trackers Ghost doesn't transmit any radio frequency signals and can't be detected using diagnostics tools. It also has no LED indicators or buttons that can give away its presence within your vehicle or van.

Anti-key cloning

The ghost immobiliser has been designed to combat key hacking and cloning. This device connects to the CAN data network in your vehicle and generates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and the steering wheel. This prevents thieves from being able to start your car. If the wrong PIN code is entered, the engine isn't able to start and it will be impossible for them to drive away with your joy and pride.

A ghost immobiliser is a new technology that is extremely difficult for thieves to defeat. Unlike physical deterrents like wheel locks and steering locks that can be cut or stolen The ghost 2 immobiliser problems immobiliser is an invisible electronic device that isn't recognized by ordinary thieves since it doesn't emit any radio signals and is completely silent.

This next generation immobiliser is able to protect your car from a myriad of threats, including cloned keys, key-hacking and even relay attacks. It can also stop thieves from stealing keys or replacing your ECU since it will not allow them to start the vehicle without entering the correct PIN.

In contrast to other immobilisers the ghost immobiliser 2 does not require any additional key fobs or remotes to operate. It is able to be deactivated by the driver's smartphone by using a simple app. This is ideal for the times you need to hand your car over for valet parking or servicing without key fobs.

The Autowatch Ghost-II is the latest evolution of our ground-breaking ghost Immobilise immobiliser. It is designed to be easy and convenient to use, while still being as secure as is possible. This is achieved by connecting the Ghost-II with the vehicle's CAN data network, which means there are no extra wires that can be hidden or easily found. It also comes with a built-in feature which allows you to deactivate the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the newest method employed by professional auto thieves to steal vehicles. Thieves can access your vehicle's OBD port with no more than a laptop, an app, and a few cables that can be bought online for less than PS50. Once they have access, they can do anything they want, from resetting your vehicle's fault codes, tuning your vehicle, or stealing it in under a minute.

If you have a Ghost immobiliser installed, it will protect your vehicle from theft using this method by requiring that an unique PIN code sequence is entered on your key fob in order to start the engine and drive away. It does this by communicating with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit and is totally undetectable to any code grabbing or RF scanning technology. It even comes with a Service/Valet option that allows your vehicle to start without the need for a PIN.

To make use of an OBD hacking device, you'll need to have a laptop with software capable of interpreting the OBD protocol. This can be purchased for under PS100 on ebay or Amazon. You will also need an OBD cable that has OBD pins which are connected to the CAN bus, these are available on eBay and Amazon for around PS50. You then need to splice the cable into the wiring harness of your vehicle for example, the radio wiring harness.

Once the hacker has gained access to the OBD port of your vehicle, they are able to send diagnostics to the system using high baud rate that will cause a crash of the car's CAN and stop the systems from working. This could cause your vehicle's engine to stall or shut down.

There is no need for additional remotes or key fobs

A car immobiliser is great piece of anti theft technology that is used by billions of modern vehicles around the globe. An aftermarket immobiliser protects your vehicle with engine ECU software that blocks vehicles from starting when a false transponder is transmitted.

It is possible for thieves, if they know the code to deactivate an immobiliser, and bypass it. A burglar could easily remove the battery from most key fobs by removing them. They could then use an easy tool to remove the circuit board inside an immobiliser and replace it with blank. They will then be capable of starting your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent data loop in CAN that is not detected by diagnostic tools like those used by high tech thieves. It also doesn't make use of a traditional key-fob that has LED indicators, so it is able to go unnoticed at a glance.

It is possible to disable Autowatch's Ghost 2 protection at certain times, such as during valet parking or during a service. Ghost CAN immobilisers feature a mode called "Service Mode,' which you can activate by the push of a button on your phone. The car is still operated, but its maximum speed will be restricted to 36 mph for added security.

If you'd like to learn more about the TASSA certified ghost tracker installation immobiliser, contact us today to book a demonstration in our workshop. A member of the team will provide a full breakdown of the system's operation and will provide you with owner manuals, installation certification, Ghost 2 emergency card and a security guarantee.

Simple Change of PIN Code

Ghost is a next-generation device that protects your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to your vehicle's CAN data network, and a personalised PIN code is programmed in it via buttons on your steering wheel & the dash. The device doesn't emit RF signals, so it is unable to be manipulated. This makes it unrecognisable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code can be altered to block earlier drivers or include an override code if you forget the sequence. When installing ghost immobiliser, the installer will demonstrate how to do this. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can repair the car without needing to know the pin code. This is a great option for customers who don't want their PIN sequence to be revealed but still wish to leave their car with valet parking or service.

Ghost is an individual system that utilizes the buttons on your vehicle to create an individual and interchangeable PIN sequence. This sequence is entered through the app on your smartphone, which means no extra LED indications are being thrown, and your vehicle is safe from the risk of being disabled by hackers or other technology.

Tested for every vehicle

Contrary to key fobs which require you to press buttons on them, a ghost immobiliser is hidden under your steering wheel or dash to make sure you are unaware it's even there. The device is connected to the CAN network of your vehicle and a PIN code can be programmed by using the buttons on your vehicle. The system won't permit your vehicle to start until this code is entered. This means that thieves can't duplicate the keys of your vehicle or gain access to the OBD to hack into it.

Ghost can be utilized in all vehicles, including electric cars motorhomes, vans, and bikes. It's also extremely versatile and can be programmed to turn off in a variety of situations. It is possible to program it to enter Valet mode, for instance, when the vehicle is transported to a valet company or parking company. This means that your vehicle can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will reactivate itself when it returns to your property.

Another great feature is that the device can be reset to your personal PIN code at any time. This is great in the event that you lose the code or in the event that the device becomes unusable.

It's also worth noting that the device is completely inaccessible to those who aren't familiar with it. It does this by analyzing the buttons on your dashboard and steering wheel and analyzing the data they send in order to determine the exact button that was activated. This makes it a secure and solid security system that is not able to be manipulated by RF scanning or jamming, or a door lock pick set.