• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a Suzuki Ignis Key

suzuki jimny key's funky and affordable city car gets a midlife refresh. It's not a hot-hatch but it can handle the tarmac in rural and urban areas well. Its tight turning circle makes driving around town effortless.

The new model also has smart safety and driver assistance technology such as lane departure warning and a drowsiness detection alarm that is a welcome addition to long drives.

Steering Lock

The steering lock is a security feature that prevents your Ignis from being stolen while in gear. It's a great safety feature however it can be frustrating when you're in a hurry and can't unlock your wheel. There are some simple ways to fix the issue.

The first step is to determine if the ignition switch is in the "on" position. If that's the case, try turning the key in the same direction you did before the wheel became locked. This may be a bit tricky, but it's typically enough to unlock the wheel.

If the wheel does not unlock after spraying canned air in the ignition cylinder, you can apply lubrication to the cylinder. Make sure you wear eye protection when doing this so that you do not get any air that has been sprayed into your eyes! You can also use liquid graphite to lubricate your piston.

If none of these strategies work, then you'll need to replace the ignition lock assembly. Fortunately, this is an easy component to find at any auto parts retailer. Just make sure you purchase an identical replacement and compare it to your old one before attempting to install it. Also, be sure to take off the cover that covers the ignition so you can inspect the assembly.

Worn

The steering lock may bind the ignition switch, causing the key to be stuck. This safety feature is designed to keep your Ignis from moving while the engine is running. If this happens it is possible to unbind the steering wheel by manipulating it.

Over time, your ignition key can start to wear out and become harder to turn. It's not the same as a faulty ignition switch, but it could occur. If this is the case, you should replace your key.

Find out if anything is blocking your Ignis ignition key from gaining access to the cylinder. There could be dirt or debris that could get stuck in the ignition cylinder, preventing it from turning.

You can also test some lubricant and see whether it helps. There are many different types of lubricant that you can purchase, so check out your garage or go to a local auto parts store to find one that is able to work.

Another alternative is to choose a silicon "glow in the dark" key cover. These covers absorb light and release it when the weather is dark or murky. They also to protect your fob or key from wear and tear. They are available for a majority of suzuki key programming models and can be purchased on the internet or at a local Suzuki Celerio Key Programming dealership.

Bent

Over time and through repeated use a key can get bent. The teeth of the key could not be able to connect with lock cylinders in the exact same way. This can prevent the key from turning. If this happens, the key will need to be replaced. If you have spare keys, it is a good idea to have it duplicated and put it in a safe spot.

The ignition cylinder can also wear out. If the lock pins inside get stuck or stuck together it can stop the key from going through or out of the cylinder. The replacement of the cylinder may solve this issue, but it's recommended to do it before your key gets stuck in the ignition to prevent further damage.

If your keys from Ignis are stuck even after you've tried the most basic solutions It could be time to lubricate the cylinder. Graphite powder or liquid graphite can assist in allowing the lock pins to move more freely and free your key. This is available at the majority of auto parts stores. Make sure that you put your Ignis into park prior to applying the lubricant. Don't try to use your hands to unbind it. This could result in more serious problems.

Broken

If you have tried all of the easier ways to make keys unstick and it still won't move, the final option is to use some fluid to get it moving. You can buy some of this from your local auto parts store and apply it to the inside of the cylinder that controls the ignition using a cotton ball, or rag. Move the key back and forth gently to spread the lubricant and try again. You can try rubbing it forward, but be careful not to push too hard because you could cause damage to the cylinder.

The circuitry inside the key may also be unresponsive due to aging and usage. This isn't the case as often and you'll have to make a duplicate of the key.

The case of your suzuki swift keyless entry keyfob might also become damaged or worn. This is especially true in the case of a low-cost keyfob that is a replica with a rubber or plastic shell. The Key Crew may be capable of moving the internal circuitry from the old keyfob to a replacement case depending on the circumstance. This will save you the cost of buying an entirely new keyfob. We'll let you know what options are available for your situation when we call you to set up the service.