• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to repair a broken window handle with the right tools. It is essential to know the type of handle you have and its spindle size before you purchase an alternative.

Older uPVC window handles have a spur which extends and is locked over a wedge striker for cockspur. These can be right-handed or left-handed, and must be matched when replacing.

What kind of lock or handle do you have? I have

There are a variety of upvc window handles and locks, each having their distinct advantages and functions. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism functions as intended. As time passes, and with regular use the handles made of upvc on your windows can become damaged and worn out. This makes them less secure and less effective. In some cases they might even be completely removed. If you find that your window handles have fallen off, it is crucial to repair them as quickly as possible. This will prevent possible break-ins and will keep your home secure.

It's a task that anyone can complete. With just a few tools and the proper knowledge, this is a simple procedure that shouldn't take more than a couple minutes. To get started you must determine the kind of lock and handle that you have on your window made of upvc and then to find the ideal replacement.

Inline Espagnolette Handles

These are the most common kind of upvc handle and are usually located on the other side of your window. They have a flat design and feature a latch that connects to the locking mechanism of the window frame when it is turned. Inline upvc handles also come with spindles that run through the middle of the handle and then into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window sash replacement frames. They have a distinctive, hook-shaped design. Cockspur handles are attached to the frame of the window with a single screw and are less secure than other varieties of window handles.

Tilt and Turn Handles

The tilt and turn handles are different from other handles made of upvc in that they can be rotated for opening the window, and then tilted into the window to ventilate. They have a 7mm spindle in the back and are available both in left and right-handed versions.

When purchasing replacement window handles made of upvc, it is important to measure the spindle's length as not all are identical in size. Drop something in the middle of the hole to measure the length. This is the largest spindle size that will fit into your windows.

What is a spindle?

uPVC window handles function similarly like doors. By turning the handle, you will be able to open a latch in the frame. The window then opens and closed. These handles can be damaged, particularly if they're frequently used or exposed to harsh conditions. This could mean that you have to replace your uPVC handles for windows as they may not be able to operate the window correctly for a long time.

There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle style uses an individual spindle to lock the window mechanism. It is essential to determine the type of handle you have installed on your uPVC windows so that you can replace it with the correct one.

The base of the handle will inform you what type of uPVC it is. There should be a "snap in cover' over one screw that holds the handle base in the correct position. Take it off and you should be able to see the second holding screw on the opposite side of the base section of the handle. After both screws have been removed then you should be able to remove the handle from the uPVC.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Make note of the length of the spindle since you'll need to make sure that you buy an alternative that is the same length as your original handle and locking mechanism.

The spindle wears down and becomes inoperable with the locking mechanism. This could be due to wear and tear from continuous use or a loosening of the locking mechanism, or even rust over time. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles can become damaged or even broken over the course of time. It is important to repair them as quickly a possible to ensure your security. Fortunately, replacing a worn or damaged handle is a fairly simple task that can be accomplished in less than an hour and doesn't require any special tools.

The first step to remove the old handle is to remove the screw located at the top of the handle base. Once the screw has been removed, the handle will be pulled away. There will be another screw located at the bottom of the handle base, and this can be removed too. When both screws are removed the handle can be removed from the base portion of the window.

After the handle has been removed, take the new handle and align the fixing holes with the holes currently in the window frame. There may be a little sticker or caps on the new handle, so take off them if needed and then screw the handle into the frame. It is essential to ensure that the handle is working after it is installed. Turn the handle and make sure that the lock mechanism is working.

Espag handles have spindles that protrude from the handle and slot into the multipoint locking mechanism of the frame of the window. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the outer frame or transom bar cross-member in the window.

Once you have installed the new handle, slide the spindle inside the window lock and tighten it. Once the handle is securely fixed then replace the snap-in cover and screw cap (if applicable). The handle is now ready to use, so try opening and closing the window several times to ensure that it works correctly and securely.

How do I put in the new handle?

Switching your uPVC window handle isn't a big deal and the process is simple. You only need a screwdriver, and a little bit of patience. The first step is make sure that the handle is not locked and then take out any screws that are visible, you can also replace them with screw caps if needed. After removing the handle, you'll need to record the length of the spindle that extends from the back. This is crucial since it will determine the kind of handle that you will need to buy.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle runs through the handle to activate the locking mechanism inside the frame of the window. When the handle is turned it opens the latch on the window and allows it to open. In regular use and time, handles made of espagnolette can become damaged.

Cadenza handles are another type of uPVC window handle commonly used on tilt and turn windows. They have an elongated blade that functions as a multipoint locking mechanism within the window Panes replacement. They are generally more secure than espagnolette handles as they can only be opened from the inside. They can be replaced by the same procedure as espagnolette handles, however you should ensure that the new handle has an angled blade, as opposed to a flat one.

Once you have selected the right handle, simply align the new handle with the existing screw holes before screwing it into place. Then, put the screws on and test your new handle. You can accomplish this by moving the handle back and forth from the locked position to the unlocked for a few times. It is possible to contact an expert to determine if you can resolve any problems. They can provide advice on how to resolve the issue in a quick and effective manner.