• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need to source some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a variety of issues that include sagging. A sagging uPVC window can cause problems with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fit. The joint at the corner of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most of the time, uPVC Window repair leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease it could be hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like all mechanical parts, hinges can wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is easier when you have a person to assist in holding the frame up.

Check that the uPVC hinges open and close in the proper direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to give advice.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. However, it is important to realize that all windows have a life span and there may come an point at which it is more efficient to replace them than fix them. If you have any problems with your window made of upvc you should consult an expert as soon as possible.