• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. However when windows with double panes are secured by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is significant, you may prefer a security screen that also includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your upvc window repair window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can reach the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the caulking used previously may require removal before a new layer is applied. It is essential to remember that when it comes to upvc window repair window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with the breeze. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. Changing a window hinge is essentially a simple procedure, but it is easier when you have a person to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also reduce the risk of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges, also because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window and can also become misaligned, again it's possible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them instead of fixing them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as you can.