• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and 257634 keep their homes comfortable. In the event of major damages such as broken glass or a damaged frame, a window replacement could be required.

Many other problems can be fixed to extend the lifespan of windows. Common issues include:

Cracked or broken Panes

Cracked windows can be caused by a lawnmowers that throws rocks at the wrong time or a tree branch being blown by strong winds. This is not only visually bad, but it can result in higher energy bills as the broken pieces let cold air into your house. Fortunately, it's generally simple to repair windows with broken panes.

Start by carefully removing glass with gloves and safety sunglasses. You may need to use a utility knife to loosen any remaining putty or old glazing compound around the edges of the frame. Next, use a soft cloth or paper towel to wipe the surface of the glass and wood of the frame.

After cleaning the area, apply silicone caulking that is waterproof to the frame's edges. This will stop water from getting in through the crack, which can cause further damage to the frame and the glass.

A crack that is severe in double-paned glass could affect the gas between the panes, making your windows less insulative. If the crack is so extensive that it threatens the integrity of the window or if the inner pane is missing you might need to consult a professional.

Cracks caused by thermal stress can occur when there's a significant difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If the cracks are on two sides of a glass, it is best to replace it rather than attempt to repair it.

For cracked windows that aren't yet ready to be replaced Clear tape can do a great job of securing the crack and preventing the entry of bugs and cold air. You can cut an amount of nylon stocking big enough to cover the entire crack and then glue it to the surface with duct tape. This is not a permanent solution, but it's a good way to keep cold air out and insects away from your home. If your windows are old and you're starting to notice cracks in the glass It's an excellent idea to talk with your local window manufacturer about whether replacing the entire window would be the best solution for you.

Rotten Wood

Wood rot is a typical problem with windows. It can damage a home's appearance and create a safety danger. However, it is possible to repair wood that has rot. It is first necessary to address the cause of the wood decay. Look for leaks on the roof and other places where water could get into the wood.

You will then need to take out the rotten components of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. After removing the decayed wood, you'll need replace it with fresh wood. It is recommended that you choose treated wood for this project as it is more resistant to rot. If you are not able to replace the damaged timber you can apply wood filler and hardener to repair the damaged area. This kind of product can be found in a lot of hardware stores. To achieve the best results, follow the directions on the label.

After you have repaired the damaged areas of the window sill, it's crucial to protect the area. Apply a water-resistant sealant to the wood. A product such as Sikkens is a good choice for this task.

Use a two-part epoxy in order to protect the wood against further damage. It is easy to apply and leaves a nice finish. However, it's important that you follow the application instructions on the label. Once the epoxy filler has dried, you can sand down the surface of the wooden. Start with a rough sandpaper, then move on to more smoother grades.

The last thing you would like to do is make the area that has been damaged by exposing it to more water. It is a good idea so, to protect the surface you have repaired with an oil-based primer that will protect it from moisture. After that, you can apply the wood sealant that is waterproof.

The W won't let you open

A window that won't open can be caused by many factors. Wood frames can warp in rainy weather, or the house may have settled or someone may have nailed it shut to protect themselves. With a little patience and the right tools, you can unlock most stuck windows.

The accumulation of gunk or debris can be a major cause of the window not opening. The buildup of dirt and grime on sliding tracks, hinges, and locks over time, says Acme Glass. In addition, metal hardware may get rusty when in contact with humidity or direct sunlight. Maintaining these areas lubricated by spray grease will help prevent corrosion and 257634 keep your window operating properly.

Stuck windows could be the result of the breaking or loosening of the pulleys that are used to lift and lower the window. These components may lose tension and cause obstruction especially when the window is two or more stories higher than the ground.

If you are having trouble opening the window, try using a pry bar to gently force the window to open just a little at a time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the cause of a window that won't lift or lower. Based on the manufacturer of the windows, you'll have to consult the owner's manual for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they aren't opening, it's probably time to replace them. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let your windows slip from functional to unusable since windows that aren't properly shut could expose your home to water damage and burglary. Contact us to learn more about our windows replacement services and products today!