• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, you will need to source some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is substantial, you may prefer a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it can be caused by the handle mechanism wearing out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak originates from the glass of your double glazed window repairs near me glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it blows open with an ease. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler with someone else to help hold the frame up.

Make sure that the uPVC hinges open and close in the right direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to provide suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window repair easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also become misaligned due to wear, creating gaps between the frame and sash. They can be repaired by giving them thorough clean, however if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may be misaligned. This is located on the hinge's side and could require to be cleaned. In some instances it might be necessary to replace them.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. So, if you're experiencing problems with your Upvc Window Repair windows, it is recommended to seek assistance from a professional as soon as possible.