• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. It is discreet and does not require any additional key fobs.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence of up to 20 presses long. This will then authorize the startup of your vehicle.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are looking to improve their security. There are many kinds of aftermarket security devices that range from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. While a tracking system may assist in finding your vehicle in the case of theft, it can not prevent the crime from occurring in the first place. An immobiliser, on other hand does exactly what it says on the label: it shuts off your car's engine to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves to steal your vehicle.

Using the existing buttons in your car The ghost device is able to create an unique sequence that must be entered before the engine can start. This can be accomplished using the indicator stalk or window buttons. In addition to this option, there is an app for mobile devices that can function as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is an excellent option when you wish to donate your car to valet parking or servicing. The immobiliser will stay active.

The Ghost is an innovative and unique device that works with the buttons on your vehicle rather than as a separate unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that protects your vehicle from key cloning and hacking. It also prevents ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it works with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The advantage of using CAN data is that it operates silently in comparison to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques as well as identified by conventional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons on your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can even make this sequence up to 20 presses long for added security. The iPhone app is limited to one connection, with the Ghost's unique pairing code. the Ghost Immobiliser Tracker (Multi-Net.Su). All communication between the two devices is encrypted.

The Ghost stops car thieves from adding a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only run only if a valid PIN is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to transfer your vehicle to a valet service for maintenance without having to enter a PIN code.

Each vehicle is tested

The Autowatch ghost 11 immobiliser is the world's first aftermarket immobiliser for CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device detects signals to stop your car from starting normally until you enter a customized code. The system can be turned off or on by using your smartphone app without the need for extra wires.

Standard factory immobilisers in vehicles work by having a transponder inside the key, which sends an indication to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was created by a South African company at the top of the line in vehicle security technology. It shields you from hacking or key cloning and even key theft. Only by physically towing your vehicle away could a thief steal it, and they would still not be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, as well as the door panels, to create an individual PIN code that needs to be entered to use your vehicle. This is performed without the need for additional hardware, such as keys-fobs, and can last up to 20 presses long. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.

Ghost is more difficult to get rid of than car alarms that require disarming by pressing several buttons. This makes it an excellent alternative to a GPS tracker which helps locate your vehicle after it has been taken.

Emergency PIN code override

You don't have to look very far on social media for stories or videos of cars that were stolen using the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without your original key fobs.

The Ghost immobiliser was designed to stop this and offer an extra layer of security in order to protect your vehicle from being targeted by thieves. It is created by creating an individual pin code push sequence from your buttons on the steering wheel, door panel and the center console. This unique PIN is entered in conjunction with the original key fob to stop the engine from beginning. The unique override pin can be located on a black card that you will receive after the installation. It is simple to remember since there aren't any LED indicators.

The device is hidden in the vehicle's wires, and doesn't emit any radio signals, therefore it cannot be identified by modern criminals using diagnostic software that is able to detect the type of security system you have installed. This makes it an excellent alternative to the tracking device.

Unlike other security systems, which use a relay in engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with an electronic block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be stated prior to the installation of the device. They are also compatible with valet/service modes and is a great alternative to a tracker device when you take your car into the dealer to address an electrical problem.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen with the owners' keys. With easy access to key cloning tools and door lock pick sets, it is now easier than ever for thieves to take your pride and joy. To stop this, we have launched the autowatch ghost 2 installers near me Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your car has been stolen.

It connects directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't use radio frequencies or a key fob. It cannot be detected using diagnostics or any other hacking device. It also stops the user from using the new ECU or key to bypass the system since only the PIN code allows the engine to be started.

The device is hidden inside your car and is reached via the buttons on your steering wheel, center console and door panels. Before you can begin your vehicle, you must enter a unique and changeable PIN code that can be as long as 20 digits.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being driven away or started if a PIN code isn't entered before. If the device is armed and you attempt to drive off it will display an indicator on your dash, which will flash regularly for around 300m. If you enter your PIN code at this point it will disarm the anti-hijack system and your vehicle will continue to operate just as normal. If you don't enter your PIN code at this point, the warning will continue to flash and will require a new PIN code every attempt to start your vehicle.